International Journal of Cast Metals Research

[Mr. Nguyen]

Tải về miễn phí Volume 22, Numbers 1-4, August 2009
Tại: http://www.ingentaconnect.com/content/ma...2/f0040001

Quote: 2nd International Conference on Advances in Solidification Processes ICASP-2, 17-20 June 2008, Seggau Castle, Graz, Austria
pp. 1-1(1)
Authors: Schumacher, P.; McKay, B.J.; Eck, S.; Ludwig, A.
Articles

Microporosity in cast alloys: simple considerations on its formation
pp. 2-7(6)
Author: Lesoult, G.

Thermal-mechanical behaviour during initial solidification in continuous casting: steel grade effects
pp. 8-14(7)
Authors: Sengupta, J.; Ojeda, C.; Thomas, B.G.

In situ observation of solidification phenomena in Al-Cu and Fe-Si-Al alloys
pp. 15-21(7)
Authors: Yasuda, H.; Yamamoto, Y.; Nakatsuka, N.; Yoshiya, M.; Nagira, T.; Sugiyama, A.; Ohnaka, I.; Uesugi, K.; Umetani, K.

Effect of hydrogen content, melt cleanliness and solidification conditions on tensile properties of A356 alloy
pp. 22-25(4)
Authors: Akhtar, S.; Dispinar, D.; Arnberg, L.; Di Sabatino, M.

Temperature effects in aluminium melts due to cavitation induced by high power ultrasound
pp. 26-29(4)
Authors: Atamanenko, T.V.; Eskin, D.G.; Katgerman, L.

Observation of dendritic growth and fragmentation in Ga-In alloys by X-ray radioscopy
pp. 30-33(4)
Authors: Boden, S.; Willers, B.; Eckert, S.; Gerbeth, G.

Numerical modelling of columnar to equiaxed transition - application to microgravity experiments
pp. 34-38(5)
Authors: Noeppel, A.; Budenkova, O.; Zimmermann, G.; Sturz, L.; Mangelinck-Noël, N.; Jung, H.; Nguyen-Thi, H.; Billia, B.; Gandin, C.-A.; Fautrelle, Y.

Modelling of air-mist spray cooling heat transfer for continuous slab casting
pp. 39-42(4)
Authors: Ramstorfer, F.; Roland, J.; Chimani, C.; Mörwald, K.

Calculation of thermophysical properties of iron casting alloys
pp. 43-46(4)
Authors: Cho, I.-S.; Yoo, S.-M.; Golod, V.M.; Savyelyev, K.D.; Lim, C.-H.; Choi, J.-K.

Influence of Ti and Zr additions on solidification of Fe base intermetallics precipitating Laves phase
pp. 47-50(4)
Authors: Rigaud, V.; Daloz, D.; Lesoult, G.

Impact of buoyancy on the growth of equiaxed grains in Al-Cu
pp. 51-53(3)
Authors: Delaleau, P.; Mathiesen, R.H.; Schaffer, P.L.; Arnberg, L.

Effect of spiral shape on grain selection during casting of single crystal turbine blades
pp. 54-57(4)
Authors: Dai, H.J.; Gebelin, J.-C.; D'Souza, N.; Brown, P.D.; Dong, H.B.

Measurement of solute segregation in as-cast single crystal Ni-based superalloys
pp. 58-61(4)
Authors: D'Souza, N.; Dong, H.B.

Influence of Al and Nb on castability of a Ni-base superalloy, IN713LC
pp. 62-65(4)
Authors: Kantor, B.; Mason, C.; D'Souza, N.; Dong, H.B.; Green, N.R.

Formation of low angle boundaries in Ni-based superalloys
pp. 66-69(4)
Authors: Newell, M.; D'Souza, N.; Green, N.R.

Effect of TiB2 on univariant eutectic growth in a directionally solidified Al-alloy
pp. 70-73(4)
Authors: Ebzeeva, S.; Nagels, E.; Froyen, L.

Experimental and numerical modelling of the flow field in a CuxSny direct chill caster
pp. 74-77(4)
Authors: Eck, S.; Pfeiler, C.; Mayer, F.; Ludwig, A.; Evans, J.W.

Use of time-modulated AC magnetic fields for melt flow control during unidirectional solidification
pp. 78-81(4)
Authors: Eckert, S.; Nikrityuk, P.A.; Räbiger, D.; Willers, B.; Eckert, K.

Thermophysical properties of liquid Co-Cu-Ni alloys
pp. 82-85(4)
Authors: Schick, M.; Brillo, J.; Egry, I.

Dendritic growth texture evolution in Mg-based alloys investigated by phase-field simulation
pp. 86-89(4)
Author: Eiken, J.

Analysis of the impact of macrosegregation on hot tearing conditions during DC casting of aluminium alloys
pp. 90-93(4)
Authors: Ellingsen, K.; M'Hamdi, M.; Mortensen, D.; Fjær, H.G.

Statistical analysis of EPMA results for numerical modelling of micro-segregation in steel
pp. 94-98(5)
Authors: Senk, D.; Erdem, E.; Stratemeier, S.

Effect of controlled forced convection on macrosegregation and structure in direct-chill casting of an aluminium alloy
pp. 99-102(4)
Authors: Eskin, D.G.; Turchin, A.N.; Katgerman, L.

Melt conditioning by advanced shear technology (MCAST) for refining solidification microstructures
pp. 103-107(5)
Authors: Fan, Z.; Xia, M.; Zhang, H.; Liu, G.; Patel, J.B.; Bian, Z.; Bayandorian, I.; Wang, Y.; Li, H.T.; Scamans, G.M.

Microstructural analysis of modification and grain refinement in a hypoeutectic Al-Si alloy
pp. 108-110(3)
Authors: Faraji, M.; Katgerman, L.

Flow patterns and re-melting during filling of a large composite casting
pp. 111-114(4)
Authors: Fjeld, A.; Ludwig, A.

Dynamic 3D heat transfer simulation of continuous casting
pp. 115-118(4)
Authors: Hauser, K.; Dittenberger, K.; Hahn, S.; Chimani, C.; Fürst, C.; Ilie, S.; Lindenberger, L.; Pichlbauer, P.; Xia, G.

A thermomechanical finite element model for simulating the solidification process of squeeze casting
pp. 119-122(4)
Authors: Han, Z.Q.; Zhu, W.; Liu, B.C.

Effect of microstructure on tensile and fatigue properties of cast Mg-10Gd-2Y-0•5Zr alloy
pp. 123-126(4)
Authors: Huo, L.; Han, Z.Q.; Liu, B.C.

Numerical simulation of residual stresses for a brake disc casting
pp. 127-130(4)
Authors: Yeh, C.P.; Hwang, W.S.; Lin, C.H.

Simulation of shape and temperature field evolution of solder joints during reflow solidification process
pp. 131-134(4)
Authors: Chang, H.J.; Hwang, W.S.

Numerical simulation of solidification morphologies of pure copper by vacuum continuous casting using cellular automaton model and its experimental verification
pp. 135-138(4)
Authors: Tsai, D.C.; Hwang, W.S.; Jiang, C.S.

Solidification model for continuous steel casting with focus on flow modelling
pp. 139-142(4)
Authors: Javurek, M.; Krieger, M.; Kaufmann, B.; Lechner, M.; Mörwald, K.; Hohenbichler, G.

Prevention of longitudinal cracks in a continuously cast slab of Fe-Cr-Ni superalloy containing Al and Ti
pp. 143-146(4)
Authors: Kanbe, Y.; Ishii, T.; Todoroki, H.; Mizuno, K.

Effects of magnetic fields on crystal growth
pp. 147-150(4)
Authors: Kao, A.; Pericleous, K.; Patel, M.K.; Voller, V.

Mushy zone coarsening with fluid flow
pp. 151-154(4)
Authors: Kasperovich, G.; Ratke, L.; Steinbach, S.

Reformulation of time averaged Joule heating in presence of temperature fluctuations
pp. 155-159(5)
Authors: Kharicha, A.; Schützenhöfer, W.; Ludwig, A.; Tanzer, R.; Wu, M.

Heat transfer and solidification analysis in the mould region of a horizontal copper alloy billet continuous caster
pp. 160-163(4)
Authors: Kianfar, S.; Seyedein, S.H.; Aboutalebi, M.R.

The influence of copper on microstructure and mechanical properties of compacted graphite iron
pp. 164-167(4)
Authors: König, M.; Wessén, M.

Experimental and numerical investigations of NH4Cl solidification in a mould
Part 1: Experimental results
pp. 168-171(4)
Authors: Kharicha, M. Stefan; Eck, S.; Könözsy, L.; Kharicha, A.; Ludwig, A.

Experimental and numerical investigations of NH4Cl solidification in a mould
Part 2: numerical results
pp. 172-174(3)
Authors: Könözsy, L.; Eck, S.; Kharicha, M. Stefan; Wu, M.; Ludwig, A.

Numerical investigation of grid influence on formation of macrosegregation
pp. 175-178(4)
Authors: Könözsy, L.; Ishmurzin, A.; Mayer, F.; Grasser, M.; Wu, M.; Ludwig, A.

On solidification shrinkage of copper-lead and copper-tin-lead alloys
pp. 179-182(4)
Authors: Korojy, B.; Ekbom, L.; Fredriksson, H.

On solidification and shrinkage of brass alloys
pp. 183-186(4)
Authors: Korojy, B.; Fredriksson, H.

Truchas - a multi-physics tool for casting simulation
pp. 187-191(5)
Author: Korzekwa, D.A.

Effect of antimony on the eutectic reaction of heavy section spheroidal graphite castings
pp. 192-195(4)
Authors: Larrañaga, P.; Asenjo, I.; Sertucha, J.; Suárez, R.; Ferrer, I.; Lacaze, J.

Magnesium matrix nanocomposites fabricated by ultrasonic assisted casting
pp. 196-199(4)
Authors: Jia, X.Y.; Liu, S.Y.; Gao, F.P.; Zhang, Q.Y.; Li, W.Z.

Bidirectional solidification of radial-type porous magnesium
pp. 200-203(4)
Authors: Wang, X.; Li, Y.X.; Liu, Y.

Numerical simulation of the effect of fluid flow on solute distribution and dendritic morphology
pp. 204-207(4)
Authors: Yuan, L.; Lee, P.D.; Djambazov, G.; Pericleous, K.

Fragmentation in an Al-7 wt-%Si alloy studied in real time by X-ray synchrotron techniques
pp. 208-211(4)
Authors: Jung, H.; Mangelinck-Noël, N.; Nguyen-Thi, H.; Bergeon, N.; Billia, B.; Buffet, A.; Reinhart, G.; Schenk, T.; Baruchel, J.

Impurities in Al-5Ti-1B grain refiner rod
pp. 212-215(4)
Authors: McKay, B.J.; Nunner, G.; Geier, G.F.; Schumacher, P.

Industrial effects associated with the columnar to equiaxed transition in remelt ingots
pp. 216-219(4)
Author: Mitchell, A.

New approach to quantifying solidification path in modelling of macrosegregation in multicomponent Al alloys
pp. 220-223(4)
Authors: Ellingsen, K.; Dons, A.L.; M'Hamdi, M.; Mo, A.; Mortensen, D.

Columnar to equiaxed transition during growth of a univariant eutectic
pp. 224-227(4)
Authors: Nagels, E.; Ebzeeva, S.; Froyen, L.

Onset of rod eutectic morphology in directional solidification
pp. 228-231(4)
Authors: Serefoglu, M.; Napolitano, R.E.

On the effect of strain on peritectic reactions and transformations in Fe-Ni and Fe-Cu binary alloys
pp. 232-235(4)
Authors: Nassar, H.; Fredriksson, H.

The impact of turbulent flow on the solidification of metal alloys driven by a rotating magnetic field
pp. 236-239(4)
Authors: Nikrityuk, P.A.; Eckert, K.; Eckert, S.

Prediction of solidification behaviour via microstructure models based on granular structures
pp. 240-243(4)
Authors: Phillion, A.B.; Vernède, S.; Rappaz, M.; Cockcroft, S.L.; Lee, P.D.

Numerical simulation and experimental validation of slag entrainment during tundish draining
pp. 244-247(4)
Authors: Pirker, S.; Lechner, M.; Ernst, G.

Experimental characterisation of a semi-solid A356 alloy during solidification and remelting
pp. 248-251(4)
Authors: Dziallach, S.; Benke, S.; Prahl, U.; Bleck, W.

A multi-phase micro-segregation model
pp. 252-255(4)
Authors: Pustal, B.; Berger, R.; Subasic, E.; Laschet, G.; Schäfer, W.; Bührig-Polaczek, A.

Grain nucleation and formation in Mg-Zr alloys
pp. 256-259(4)
Authors: Qian, Ma; Stjohn, D.H.

High-intensity ultrasonic grain refinement of magnesium alloys: role of solute
pp. 260-263(4)
Authors: Ramirez, A.; Qian, Ma; Davis, B.; Wilks, T.

Influence of Mo in the structure of rapidly solidified Fe-Mo-Cr-Mn-Si-C alloy
pp. 264-267(4)
Authors: Ranganathan, S.; Makaya, A.; Fredriksson, H.

Effect of fraction solid on coarsening of secondary dendrite arms
pp. 268-270(3)
Author: Ratke, L.

Influence of dendrite arrangement on coarsening during solidification of high-solute Al alloys
pp. 271-274(4)
Authors: Ruvalcaba, D.; Eskin, D.G.; Mathiesen, R.H.; Arnberg, L.; Katgerman, L.

In situ X-ray microtomography study of the solidification and remelted microstructures of Al-Cu alloys
pp. 275-278(4)
Authors: Terzi, S.; Boller, E.; Salvo, L.; Suéry, M.

Convection driven melting of anisotropic metals
pp. 279-282(4)
Authors: Kosec, G.; Šarler, B.

Influence of alloying additions on microstructure and thermal properties in compact graphite irons
pp. 283-285(3)
Authors: Selin, M.; Holmgren, D.; Svensson, I.L.

In situ observation of phase selection in undercooled Ni-Al melts
pp. 286-289(4)
Authors: Shuleshova, O.; Holland-Moritz, D.; Löser, W.; Lindenkreuz, H.-G.; Büchner, B.

Melt flow in a mushy zone - barrier effect of intermetallic phases
pp. 290-293(4)
Authors: Steinbach, S.; Ratke, L.

Sensitivity study of IHTC on solidification simulation for automotive casting
pp. 294-297(4)
Authors: Nayak, R.K.; Sundarraj, S.

Pulsating electromagnetic casting technique for slab casting
pp. 298-301(4)
Authors: Tani, M.; Tanaka, K.; Fukunaga, S.; Toh, T.; Tunenari, K.; Umetsu, K.; Hayashi, K.; Zeze, M.

Influence of rare earths on shrinkage porosity in thin walled ductile cast iron
pp. 302-305(4)
Authors: Pedersen, K.M.; Tiedje, N.S.

Solidification paths in modified Inconel 625 weld overlay material
pp. 306-310(5)
Authors: Chandrasekaran, K.; Tiedje, N.S.; Hald, J.

Simulation of continuous casting of steel by a meshless technique
pp. 311-313(3)
Authors: Vertnik, R.; Šarler, B.

Macrosegregation of ternary Al-4•5wt-%Cu-1•0wt-%Mg alloy in horizontal direct chill casting: implementation of non-equilibrium microsegregation model
pp. 314-317(4)
Authors: Vušanovic, I.

Shear enhanced heterogeneous nucleation in some Mg- and Al-alloys
pp. 318-322(5)
Authors: Fan, Z.; Wang, Y.; Zhang, Z.F.; Xia, M.; Li, H.T.; Xu, J.; Granasy, L.; Scamans, G.M.

An idea to treat the dendritic morphology in mixed columnar-equiaxed solidification
pp. 323-326(4)
Authors: Wu, M.; Ludwig, A.

Determination of the metal/die interfacial heat transfer coefficient and its application in evaluating the pressure distribution inside the casting during the high pressure die casting process
pp. 327-330(4)
Authors: Guo, Z.-P.; Xiong, S.-M.; Liu, B.C.; Li, M.; Allison, J.

Hot tearing behaviour of binary Mg-1Al alloy using a contraction force measuring method
pp. 331-334(4)
Authors: Zhen, Z.S.; Hort, N.; Huang, Y.D.; Utke, O.; Petri, N.; Kainer, K.U.

Effect of melt flow on dendritic growth in AlSi7-based alloys during directional solidification
pp. 335-338(4)
Authors: Zimmermann, G.; Sturz, L.; Walterfang, M.; Dagner, J.

Solidification of high Nb containing TiAl based alloys
pp. 339-342(4)
Authors: Zollinger, J.; Witusiewicz, V.; Drevermann, A.; Daloz, D.; Hecht, U.
Author Index

International Journal of Cast Metals Research 2009, Volume 22.1-4
Author Index
pp. 343-344(2)

---

Support Teaching Resource Forum - TRF now